OpenHarmony开发——传感器驱动开发实例

jiecho
发布于 2021-7-2 11:51
浏览
3收藏

传感器驱动开发实例

 

 

基于HDF驱动模型,加载启动加速度计传感器驱动,代码形式如下,具体原理可参考HDF驱动开发指南。加速度传感器选择通讯接口方式为I2C,厂家选择博世BMI160加速度传感器。

 

  1. 加速度计传感器驱动入口注册
  • 加速度计传感器驱动入口函数实现
/* 注册加速度计传感器入口数据结构体对象 */
struct HdfDriverEntry g_sensorAccelDevEntry = {
    .moduleVersion = 1, /* 加速度计传感器模块版本号 */
    .moduleName = "HDF_SENSOR_ACCEL", /* 加速度计传感器模块名,要与device_info.hcs文件里的加速度计moduleName字段值一样*/
    .Bind = BindAccelDriver, /* 加速度计传感器绑定函数 */
    .Init = InitAccelDriver, /* 加速度计传感器初始化函数 */
    .Release = ReleaseAccelDriver, /* 加速度计传感器资源释放函数 */
};

/* 调用HDF_INIT将驱动入口注册到HDF框架中,在加载驱动时HDF框架会先调用Bind函数,再调用Init函数加载该驱动,当Init调用异常时,HDF框架会调用Release释放驱动资源并退出 */
HDF_INIT(g_sensorAccelDevEntry);
  • 加速度计传感器设备配置描述

加速度传感器模型使用HCS作为配置描述源码,HCS配置字段详细介绍参考配置管理介绍。

/* 加速度计传感器设备HCS配置 */
device_sensor_accel :: device {
    device0 :: deviceNode {
        policy = 1; /* policy字段是驱动服务发布的策略 */
        priority = 105; /* 驱动启动优先级(0-200),值越大优先级越低,建议默认配100,优先级相同则不保证device的加载顺序 */
        preload = 2; /* 驱动按需加载字段,0表示加载,2表示不加载 */
        permission = 0664; /* 驱动创建设备节点权限 */
        moduleName = "HDF_SENSOR_ACCEL"; /* 驱动名称,该字段的值必须和驱动入口结构的moduleName值一致 */
        serviceName = "sensor_accel"; /* 驱动对外发布服务的名称,必须唯一 */
        deviceMatchAttr = "hdf_sensor_accel_driver"; /* 驱动私有数据匹配的关键字,必须和驱动私有数据配置表中的match_attr值相等 */
    }
} 
  1. 加速度计传感器驱动初始化和去初始化
  • 初始化入口函数init
    /* 加速度计传感器驱动对外提供的服务绑定到HDF框架 */
    int32_t BindAccelDriver(struct HdfDeviceObject *device)
    {
        CHECK_NULL_PTR_RETURN_VALUE(device, HDF_ERR_INVALID_PARAM);
    
        static struct IDeviceIoService service = {
            .object = {0},
            .Dispatch = DispatchAccel,
        };
        device->service = &service;
    
        return HDF_SUCCESS;
    }
    /*在探测到器件在位后,需要调用RegisterAccelChipOps注册差异化适配函数*/
    int32_t RegisterAccelChipOps(struct AccelOpsCall *ops)
    {
        struct AccelDrvData *drvData = NULL;
    
        CHECK_NULL_PTR_RETURN_VALUE(ops, HDF_ERR_INVALID_PARAM);
    
        drvData = AccelGetDrvData();
        drvData->ops.Init = ops->Init;
        drvData->ops.ReadData = ops->ReadData;
        return HDF_SUCCESS;
    }
    /* 挂载加速度计传感器驱动归一化的接口函数 */
    static int32_t InitAccelOps(struct SensorDeviceInfo *deviceInfo)
    {
        struct AccelDrvData *drvData = AccelGetDrvData();
    
        (void)memset_s((void *)deviceInfo, sizeof(*deviceInfo), 0, sizeof(*deviceInfo));
        deviceInfo->ops.GetInfo = SetAccelInfo;
        deviceInfo->ops.Enable = SetAccelEnable;
        deviceInfo->ops.Disable = SetAccelDisable;
        deviceInfo->ops.SetBatch = SetAccelBatch;
        deviceInfo->ops.SetMode = SetAccelMode;
        deviceInfo->ops.SetOption = SetAccelOption;
    
        if (memcpy_s(&deviceInfo->sensorInfo, sizeof(deviceInfo->sensorInfo),
            &drvData->accelCfg->sensorInfo, sizeof(drvData->accelCfg->sensorInfo)) != EOK) {
            HDF_LOGE("%s: copy sensor info failed", __func__);
            return HDF_FAILURE;
        }
        /* 传感器类型标识可以在数据HCS配置文件里面配置,也可以在此处 */
        drvData->accelCfg->sensorInfo.sensorTypeId = SENSOR_TAG_ACCELEROMETER;
        drvData->accelCfg->sensorInfo.sensorId = SENSOR_TAG_ACCELEROMETER;
    
        return HDF_SUCCESS;
    }
    /* 传感器寄存器初始化操作 */
    static int32_t InitAccelAfterConfig(void)
    {
        struct SensorDeviceInfo deviceInfo;
    
        if (InitAccelConfig() != HDF_SUCCESS) {
            HDF_LOGE("%s: init accel config failed", __func__);
            return HDF_FAILURE;
        }
    
        if (InitAccelOps(&deviceInfo) != HDF_SUCCESS) {
            HDF_LOGE("%s: init accel ops failed", __func__);
            return HDF_FAILURE;
        }
    
        if (AddSensorDevice(&deviceInfo) != HDF_SUCCESS) {
            HDF_LOGE("%s: add accel device failed", __func__);
            return HDF_FAILURE;
        }
    
        return HDF_SUCCESS;
    }
    /*通过器件探测函数,挂载器件差异化函数接口*/
    static int32_t DetectAccelChip(void)
    {
        int32_t num;
        int32_t ret;
        int32_t loop;
        struct AccelDrvData *drvData = AccelGetDrvData();
        CHECK_NULL_PTR_RETURN_VALUE(drvData->accelCfg, HDF_ERR_INVALID_PARAM);
    
        num = sizeof(g_accelDetectIfList) / sizeof(g_accelDetectIfList[0]);
        for (loop = 0; loop < num; ++loop) {
            if (g_accelDetectIfList[loop].DetectChip != NULL) {
                ret = g_accelDetectIfList[loop].DetectChip(drvData->accelCfg);
                if (ret == HDF_SUCCESS) {
                    drvData->detectFlag = true;
                    break;
                }
            }
        }
    
        if (loop == num) {
            HDF_LOGE("%s: detect accel device failed", __func__);
            drvData->detectFlag = false;
            return HDF_FAILURE;
        }
        return HDF_SUCCESS;
    }
    /* 加速度计传感器驱动初始化入口函数,主要功能为对传感器私有数据的结构体对象进行初始化,传感器HCS数据配置对象空间分配,传感器HCS数据配置初始化入口函数调用,传感器设备探测是否在位功能,传感器数据上报定时器创建,传感器归一化接口挂载,传感器设备注册功能 */
    int32_t InitAccelDriver(struct HdfDeviceObject *device)
    {
        /* 获取传感器私有数据结构体对象 */
        struct AccelDrvData *drvData = AccelGetDrvData();
    
       /* 同类型传感器不同厂家设备探测时,判断此类型传感器是否已经在位,若已经在位,无需再继续探测,直接返回 */
        if (drvData->detectFlag) {
            HDF_LOGE("%s: accel sensor have detected", __func__);
            return HDF_SUCCESS;
        }
    
        CHECK_NULL_PTR_RETURN_VALUE(device, HDF_ERR_INVALID_PARAM);
        /* 分配存放传感器数据配置的私有结构体数据对象,需要在驱动释放时释放分配的资源空间 */
            drvData->accelCfg = (struct SensorCfgData *)OsalMemCalloc(sizeof(*cfg));
            if (drvData->accelCfg == NULL) {
                HDF_LOGE("%s: malloc sensor config data failed", __func__);
                return HDF_FAILURE;
            }
      
        drvData->accelCfg->regCfgGroup = &g_regCfgGroup[0];
        /* 初始化传感器配置数据主要是解析传感器通讯总线配置类型信息,传感器基本信息,传感器属性信息,传感器是否在位信息,寄存器分组信息 */
        if (GetSensorBaseConfigData(device->property, drvData->accelCfg) != HDF_SUCCESS) {
            HDF_LOGE("%s: get sensor base config failed", __func__);
            goto Base_CONFIG_EXIT;
        }
    
        if (DetectAccelChip() != HDF_SUCCESS) {
            HDF_LOGE("%s: accel sensor detect device no exist", __func__);
            goto DETECT_CHIP_EXIT;
        }
        drvData->detectFlag = true;
        if (ParseSensorRegConfig(drvData->accelCfg) != HDF_SUCCESS) {
            HDF_LOGE("%s: detect sensor device failed", __func__);
            goto REG_CONFIG_EXIT;
        }
    
        if (InitAccelAfterConfig() != HDF_SUCCESS) {
            HDF_LOGE("%s: init accel after config failed", __func__);
            goto INIT_EXIT;
        }
    
        HDF_LOGI("%s: init accel driver success", __func__);
        return HDF_SUCCESS;
    
    INIT_EXIT:
        DestroySensorThread(&drvData->thread, &drvData->threadStatus);
        (void)DeleteSensorDevice(SENSOR_TAG_ACCELEROMETER);
    REG_CONFIG_EXIT:
        ReleaseSensorAllRegConfig(drvData->accelCfg);
        (void)ReleaseSensorBusHandle(&drvData->accelCfg->busCfg);
    DETECT_CHIP_EXIT:
        drvData->detectFlag = false;
    BASE_CONFIG_EXIT:
        drvData->accelCfg->root = NULL;
        drvData->accelCfg->regCfgGroup = NULL;
        OsalMemFree(drvData->accelCfg);
        drvData->accelCfg = NULL;
        return HDF_FAILURE;
    }
    
    /* 释放驱动初始化时分配的资源 */
    void ReleaseAccelDriver(struct HdfDeviceObject *device)
    {
        (void)device;
        struct AccelDrvData *drvData = NULL;
    
        drvData = AccelGetDrvData();
        (void)DestroySensorThread(&drvData->thread, &drvData->threadStatus);
        (void)DeleteSensorDevice(SENSOR_TAG_ACCELEROMETER);
        drvData->detectFlag = false;
    
        if (drvData->accelCfg != NULL) {
            drvData->accelCfg->root = NULL;
            drvData->accelCfg->regCfgGroup = NULL;
            ReleaseSensorAllRegConfig(drvData->accelCfg);
            (void)ReleaseSensorBusHandle(&drvData->accelCfg->busCfg);
            OsalMemFree(drvData->accelCfg);
            drvData->accelCfg = NULL;
        }
    
        drvData->initStatus = false;
    }​
  1. 加速度计传感器寄存器组配置信息

加速度计传感器数据配置只需要按照模板配置即可,基于模板配置的解析功能已经在InitSensorConfigData函数完成,只需初始化时调用即可。如果有新增配置项,需要同步修改此函数。

加速度传感器数据配置模板(accel_config.hcs)
root {
    sensorAccelConfig {
        accelChipConfig {
            /* 传感器设备信息模板 */
            template sensorInfo {
                sensorName = "accelerometer"; /* 加速度计名字,字符最大长度16字节 */
                vendorName = "borsh_bmi160"; /* 传感器设备厂商,字符最大长度16字节 */
                firmwareVersion = "1.0"; /* 传感器固件版本号,默认1.0,字符最大长度16字节 */
                hardwareVersion = "1.0"; /* 传感器硬件版本号,默认1.0,字符最大长度16字节 */
                sensorTypeId = 1; /* 传感器类型编号,详见{@link SensorTypeTag} */
                sensorId = 1; /* 传感器的标识号,有传感器驱动开发者定义,推荐用{@link SensorTypeTag}枚举 */
                maxRange = 8; /* 传感器的最大量程,根据开发者需要配置 */
                precision = 0; /* 传感器的精度,与上报数据配合使用,上报数据结构体{@link SensorEvents } */
                power = 230; /* 传感器的功耗 */
            }
            /* 传感器使用的总线类型和配置信息模板 */
            template sensorBusConfig {
                busType = 0; /* 0:i2c 1:spi */ 
                busNum = 6; /* 芯片上分配给传感器的器件号 */ 
                busAddr = 0; /* 芯片上分配给传感器的地址 */
                regWidth = 1; /* 传感器寄存器地址宽度 */
                regBigEndian = 0; /* 传感器寄存器大小端 */ 
            }
            /* 传感器设备属性模板 */
            template sensorAttr {
                chipName = ""; /* 传感器芯片名字 */
                chipIdRegister = 0xf; /* 传感器在位检测寄存器地址 */
                chipIdValue = 0xd1; /* 校验传感器在位检测寄存器值 */
            }
        }
    }
}

/* 根据不同器件硬件差异,修改模板配置,不修改的就会默认采用模板配置 */
root {
    sensorAccelConfig {
        accel_bmi160_chip_config : accelChipConfig {
            match_attr = "hdf_sensor_accel_driver"; /* 需要和加速度传感器设备配置match_attr字段保持一致 */
            accelInfo :: sensorInfo {
                vendorName = "borsh_bmi160";
                sensorTypeId = 1;
                sensorId = 1;
            }
            accelBusConfig :: sensorBusConfig {
                busType = 0; /* i2c通讯方式 */
                busNum = 6;
                busAddr = 0x68;
                regWidth = 1; /* 1字节位宽 */ 
            }
            accelAttr :: sensorAttr {
                chipName = "bmi160";
                chipIdRegister = 0x00;
                chipIdValue = 0xd1;
            }
            accelRegConfig {
                /*  regAddr: 寄存器地址
                    value: 寄存器值
                    mask: 寄存器值的掩码
                    len: 寄存器值的数据长度(字节)
                    delay: 配置寄存器延时(ms)
                    opsType:操作类型 0-无 1-读 2-写 3-读并检查 4-位更新
                    calType: 计算类型 0-无 1-写 2-取反 3-异或 4-左移 5-右移
                    shiftNum: 移动位数
                    debug: 调试开关,0-调试关闭 1-调试打开
                    save: 保存数据开关,0-不保存数据 1-保存数据 
                */
                /* 传感器寄存器操作分组,按照分组进行有序配置 */
                /* 寄存器地址, 寄存器值, 寄存器值的掩码, 寄存器值的数据长度, 配置寄存器延时, 操作类型, 计算类型, 移动位数, 调试开关, 保存开关 */
                /* 初始化寄存器组 */
                initSeqConfig = [
                    0x7e,    0xb6, 0xff,   1,     5,       2,       0,        0,     0,    0,
                    0x7e,    0x10, 0xff,   1,     5,       2,       0,        0,     0,    0
                ];
                /* 使能寄存器组 */
                enableSeqConfig = [
                    0x7e,    0x11, 0xff,   1,     5,       2,       0,        0,     0,    0,
                    0x41,    0x03, 0xff,   1,     0,       2,       0,        0,     0,    0,
                    0x40,    0x08, 0xff,   1,     0,       2,       0,        0,     0,    0
                ];
                /* 去使能寄存器组 */
                disableSeqConfig = [
                    0x7e,    0x10, 0xff,   1,     5,       2,       0,        0,     0,    0
                ];
            }
        }
    }
}
  1. 加速度计传感器驱动操作接口实现

开发者需要根据每种类型的传感器实现归一化接口。

/* 不使用函数暂时置空 */
static int32_t SetAccelInfo(struct SensorBasicInfo *info)
{
    (void)info;

    return HDF_ERR_NOT_SUPPORT;
}
/* 下发使能寄存器组的配置 */
static int32_t SetAccelEnable(void)
{
    int32_t ret;
    struct AccelDrvData *drvData = AccelGetDrvData();

    CHECK_NULL_PTR_RETURN_VALUE(drvData->accelCfg, HDF_ERR_INVALID_PARAM);
    ret = SetSensorRegCfgArray(&drvData->accelCfg->busCfg, drvData->accelCfg->regCfgGroup[SENSOR_ENABLE_GROUP]);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s: accel sensor disable config failed", __func__);
        return HDF_FAILURE;
    }

    drvData->threadStatus = SENSOR_THREAD_RUNNING;

    return HDF_SUCCESS;
}
/* 下发去使能寄存器组的配置 */
static int32_t SetAccelDisable(void)
{
    int32_t ret;
    struct AccelDrvData *drvData = AccelGetDrvData();

    CHECK_NULL_PTR_RETURN_VALUE(drvData->accelCfg, HDF_ERR_INVALID_PARAM);

    ret = SetSensorRegCfgArray(&drvData->accelCfg->busCfg, drvData->accelCfg->regCfgGroup[SENSOR_DISABLE_GROUP]);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s: accel sensor disable config failed", __func__);
        return HDF_FAILURE;
        }

    drvData->threadStatus = SENSOR_THREAD_STOPPED;

    return HDF_SUCCESS;
}
/* 配置传感器采样率和数据上报间隔 */
static int32_t SetAccelBatch(int64_t samplingInterval, int64_t interval)
{
    (void)interval;

    struct AccelDrvData *drvData = AccelGetDrvData();
    drvData->interval = samplingInterval;

    return HDF_SUCCESS;
}
/* 设置传感器工作模式,当前支持实时模式 */
static int32_t SetAccelMode(int32_t mode)
{
    return (mode == SENSOR_WORK_MODE_REALTIME) ? HDF_SUCCESS : HDF_FAILURE;
}
/* 设置传感器可选配置 */
static int32_t SetAccelOption(uint32_t option)
{
    (void)option;
    return HDF_ERR_NOT_SUPPORT;
}

 

差异化处理接口

/* 器件探测时,如果探测成功,则注册差异化处理函数到accel驱动模型里 */
int32_t DetectAccelBim160Chip(struct SensorCfgData *data)
{
    int32_t ret;
    struct AccelOpsCall ops;
    CHECK_NULL_PTR_RETURN_VALUE(data, HDF_ERR_INVALID_PARAM);

    if (strcmp(ACCEL_CHIP_NAME_BMI160, data->sensorAttr.chipName) != 0) {
        return HDF_SUCCESS;
    }
    ret = InitAccelPreConfig();
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s: init  BMI160 bus mux config", __func__);
        return HDF_FAILURE;
    }
    if (DetectSensorDevice(data) != HDF_SUCCESS) {
        return HDF_FAILURE;
    }

   /* 差异化处理函数 */
    ops.Init = InitBmi160;
    ops.ReadData = ReadBmi160Data;
    ret = RegisterAccelChipOps(&ops);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s: register BMI160 accel failed", __func__);
        (void)ReleaseSensorBusHandle(&data->busCfg);
        return HDF_FAILURE;
    }
    return HDF_SUCCESS;
}
/* 初始化处理函数 */
static int32_t InitBmi160(struct SensorCfgData *data)
{
    int32_t ret;

    CHECK_NULL_PTR_RETURN_VALUE(data, HDF_ERR_INVALID_PARAM);
    ret = SetSensorRegCfgArray(&data->busCfg, data->regCfgGroup[SENSOR_INIT_GROUP]);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s: bmi160 sensor init config failed", __func__);
        return HDF_FAILURE;
    }
    return HDF_SUCCESS;
}
/* 数据处理函数 */
int32_t ReadBmi160Data(struct SensorCfgData *data)
{
    int32_t ret;
    struct AccelData  rawData = { 0, 0, 0 };
    int32_t tmp[ACCEL_AXIS_NUM];
    struct SensorReportEvent event;

    (void)memset_s(&event, sizeof(event), 0, sizeof(event));

    ret = ReadBmi160RawData(data, &rawData, &event.timestamp);
    if (ret != HDF_SUCCESS) {
        return HDF_FAILURE;
    }

    event.sensorId = SENSOR_TAG_ACCELEROMETER;
    event.option = 0;
    event.mode = SENSOR_WORK_MODE_REALTIME;

    rawData.x = rawData.x * BMI160_ACC_SENSITIVITY_2G;
    rawData.y = rawData.y * BMI160_ACC_SENSITIVITY_2G;
    rawData.z = rawData.z * BMI160_ACC_SENSITIVITY_2G;

    tmp[ACCEL_X_AXIS] = (rawData.x * SENSOR_1K_UNIT) / SENSOR_CONVERT_UNIT;
    tmp[ACCEL_Y_AXIS] = (rawData.y * SENSOR_1K_UNIT) / SENSOR_CONVERT_UNIT;
    tmp[ACCEL_Z_AXIS] = (rawData.z * SENSOR_1K_UNIT) / SENSOR_CONVERT_UNIT;

    event.dataLen = sizeof(tmp);
    event.data = (uint8_t *)&tmp;
    ret = ReportSensorEvent(&event);
    return ret;
}
  • 数据处理函数

创建传感器定时器,按照配置的采样率定时采样,并上报给数据订阅者。

/* 传感器定时工作线程 */
static int32_t ReadAccelDataThreadWorker(void *arg)
{
    (void)arg;
    int64_t interval;
    struct AccelDrvData *drvData = AccelGetDrvData();

    drvData->threadStatus = SENSOR_THREAD_START;
    while (true) {
        if (drvData->threadStatus == SENSOR_THREAD_RUNNING) {
            if (drvData->ops.ReadData != NULL) {
                (void)drvData->ops.ReadData(drvData->accelCfg);
            }
            interval = OsalDivS64(drvData->interval, (SENSOR_CONVERT_UNIT * SENSOR_CONVERT_UNIT));
            OsalMSleep(interval);
        } else if (drvData->threadStatus == SENSOR_THREAD_DESTROY) {
            break;
        } else {
            OsalMSleep(ACC_DEFAULT_SAMPLING_200_MS / SENSOR_CONVERT_UNIT / SENSOR_CONVERT_UNIT);
        }

        if ((!drvData->initStatus) || (drvData->interval < 0) || drvData->threadStatus != SENSOR_THREAD_RUNNING) {
            continue;
        }
    }

    return HDF_SUCCESS;
}
/* 创建传感器定时器和器件初始化 */
static int32_t InitAccelConfig(void)
{
    int32_t ret;
    struct AccelDrvData *drvData = AccelGetDrvData();

    if (drvData->threadStatus != SENSOR_THREAD_NONE && drvData->threadStatus != SENSOR_THREAD_DESTROY) {
        HDF_LOGE("%s: accel thread have created", __func__);
        return HDF_SUCCESS;
    }

    ret = CreateSensorThread(&drvData->thread, ReadAccelDataThreadWorker, "hdf_sensor_accel", drvData);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s: accel create thread failed", __func__);
        drvData->threadStatus = SENSOR_THREAD_NONE;
        return HDF_FAILURE;
    }

    CHECK_NULL_PTR_RETURN_VALUE(drvData->ops.Init, HDF_ERR_INVALID_PARAM);

    ret = drvData->ops.Init(drvData->accelCfg);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s: accel create thread failed", __func__);
        drvData->threadStatus = SENSOR_THREAD_NONE;
        return HDF_FAILURE;
    }
    drvData->initStatus = true;
    return HDF_SUCCESS;
}
  • 主要的数据结构
    /* 传感器转换单位*/
    #define SENSOR_CONVERT_UNIT             1000
    #define SENSOR_1K_UNIT                  1024
    /* 传感器2g对应灵敏度转换值 */
    #define BMI160_ACC_SENSITIVITY_2G       61
    /* 传感器数据采样寄存器地址 */
    #define BMI160_ACCEL_X_LSB_ADDR              0X12
    #define BMI160_ACCEL_X_MSB_ADDR              0X13
    #define BMI160_ACCEL_Y_LSB_ADDR              0X14
    #define BMI160_ACCEL_Y_MSB_ADDR              0X15
    #define BMI160_ACCEL_Z_LSB_ADDR              0X16
    #define BMI160_ACCEL_Z_MSB_ADDR              0X17
    /* 传感器数据维度 */
    enum AccelAxisNum {
        ACCEL_X_AXIS   = 0,
        ACCEL_Y_AXIS   = 1,
        ACCEL_Z_AXIS   = 2,
        ACCEL_AXIS_NUM = 3,
    };
    /* 传感器每个维度值 */
    struct AccelData {
        int32_t x;
        int32_t y;
        int32_t z;
    };
    /* 传感器私有数据结构体 */
    struct AccelDrvData {
        bool detectFlag;
        uint8_t threadStatus;
        uint8_t initStatus;
        int64_t interval;
        struct SensorCfgData *accelCfg;
        struct OsalThread thread;
        struct AccelOpsCall ops;
    };
    /* 差异化适配函数 */
    struct AccelOpsCall {
        int32_t (*Init)(struct SensorCfgData *data);
        int32_t (*ReadData)(struct SensorCfgData *data);
    };​

 

已于2021-7-2 11:51:32修改
2
收藏 3
回复
举报
回复
    相关推荐